<small id="a20as"></small>
  • <div id="a20as"><li id="a20as"></li></div><small id="a20as"></small>
  • <xmp id="a20as"><div id="a20as"></div>
    <div id="a20as"><button id="a20as"></button></div>
  • <div id="a20as"><li id="a20as"></li></div>
  • <div id="a20as"><li id="a20as"></li></div>
  • <small id="a20as"><li id="a20as"></li></small>
  • 精煉機淋洗槽的優化
    2023-02-09 10:35:28   來源:   評論:0 點擊:

    為提高精煉機淋洗槽的耐腐蝕性、減少辮子絲,闡述淋洗槽結構與工作原理;將淋洗槽材質由904L不銹鋼優化為鈦板,淋洗方式由兩側淋洗優化為單邊淋洗并開槽


    李穩生
    (唐山三友遠達纖維有限公司,河北 唐山  063305)
     
    摘要:為提高精煉機淋洗槽的耐腐蝕性、減少辮子絲,闡述淋洗槽結構與工作原理;將淋洗槽材質由904L不銹鋼優化為鈦板,淋洗方式由兩側淋洗優化為單邊淋洗并開槽;通過優化前后試驗對比,結果表明:改進后的淋洗槽耐腐蝕性好、避免了異物掉落造成纖維污染;使用周期長,降低成本,安全可靠性提升;減少辮子絲和非計劃停車次數,延長壓輥、軋車輥的使用壽命,提高纖維產品品質。
    關鍵詞:精煉機;淋洗槽;904L不銹鋼;鈦板;耐腐蝕性;單邊淋洗;辮子絲
    中圖分類號:TS142.1+2             文獻標志碼:B            文章編號:1001-9634(2022)06-0015-03
     
    收稿日期:2022-03-22
    作者簡介:李穩生(1984—),男,河北唐山人,工程師,主要從事車間設備維護管理工作。
     
    Optimization of Leaching Tank of Refining Machine
    LI Wensheng
    (Tangshan Sanyou Yuanda Fiber Co.,Ltd.,Tangshan 063305,China)
     
    Abstract:In order to improve the corrosion resistance of the leaching tank of the refining machine and reduce the pigtail yarns,the structure and working principle of the leaching tank are expounded.The material of the leaching tank is optimized from 904L stainless steel to titanium plate,and the leaching method is optimized from two sides to single side and slotted.The experimental comparison before and after optimization shows that the improved leaching tank has good corrosion resistance and avoids fiber pollution caused by foreign object dropping;the improved leaching tank has long service life,reduces cost,and improves safety and reliability;the pigtail yarns and unplanned stop times are reduced,the service life of compaction roller and rolling roller are extended,and the quality of fiber products is improved.
    Key Words:refining machine;leaching tank;904L stainless steel;titanium plate;corrosion resistance;single side leaching;pigtail yarn

    參考文獻:
    [1] 常安全,趙樹忠,孫林東.精煉機淋洗槽的改進[J].中國化工貿易,2012(1):35.
    [2] 黃家玉,張瑞志.人造纖維工廠裝備[M].青島:青島海洋大學出版社,1993.


    相關熱詞搜索:精煉機 淋洗槽 904L不銹鋼

    上一篇:埃及長絨棉特性分析與紡紗面料質量控制
    下一篇:噴氣織機批量生產工藝

    分享到: 收藏
    ? 久久免费看少妇高潮A片入口